Emmaline Hardware

Metal Zipper Ends - these can be added to the ends of zippers instead of sewing fabric zipper tabs which can be quite fiddly! Can also be used as cord ends. Go to the Installation Tutorial. Instructions: Trim the zipper tails off so they are just beyond...

These heavy, high quality turn locks are of superb quality and will make a statement on any of your handmade bags and purses. Easy to install with included screws to attach the front and back plates together onto the front flap, and a metal washer to connect turning (twist) part onto the bag/wallet body....

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight. They also have screw holes in the...

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight. They also have screw holes in the...

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight. They also have screw holes in the...

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight. They also have screw holes in the...

Metal Corners for use on bag, clutch, & wallet flaps or even book covers. Suitable for fabric/leather thickness of 3mm. Bling up your bag or wallet with these corners! Click here for a great installation tutorial on Chris W Designs' blog. ...

Sold in packages with TWO pairs of frames, so you can make two bags! Approximate Length (6" X 2 1/4") These wire frames are specially designed for the Small sizes of the Trifecta Zip Bags , pattern by Emmaline Bags. 2 Wire frames (1 pair) are required for each of the 3 sizes of the Small Set.

Sold by the pair. Approximate Size (14" X 4 3/4") There are two FREE projects that use these frames! Check out the free Pampering Pouch pattern from Mrs H here . And a free Laundrey Hamper tutorial on the Emmaline blog here .

Sold by the Pair. Approximate Size (10" X 3 1/2") These wires are a rectangle shape, with 90 degree angles. They are used in the Luxie-Lunch Bag , an Emmaline Bags pattern which is available here . The frames are also made for the LARGE SIZE of the Emmaline Bags free pattern the " Retreat Bag "...

Approximate Length (8 1/2" X 2 1/4") - Sold by the Pair These wire frames are specially designed and made for the SMALL SIZE of the Emmaline Bags free pattern The Retreat Bag . Two Wire frames are required for this cute and handy bag, and when using them in the top of your Retreat bag, make a firm,...

Note: The HINGE on the tube frame HAS CHANGED. These internal frames are just the thing for carpet bags and doctor's bags. They have quality, barrel type hinges and are used in The Companion Carpet Bag by Sewing Patterns by Mrs. H. Large size (12") Installation: Remove pins, insert frame into frame casing...

These zipper pulls are an exclusive Emmaline design. They each come with a strong lobster hook and split ring that will not pull apart or break, already attached. Debossed with "handmade" on both sides, these zipper pulls add an eye-catching statement to your bag openings, exterior pockets, or interior...

Metal Zipper pulls are an exclusive Emmaline design. These are thinner and a bit longer than the "handmade" version sold in another listing, and are perfect for zipper pouches, purses, internal pockets, and bag openings. Pair with a co-ordinating metal bag label. These pulls each come...

These heavy, high quality turn locks are of superb quality and will make a statement on any of your handmade bags and purses. Easy to install with included screws. 1- 7 /8" ( 47 mm) wide 3/4" (18 mm) high Important!! These are suitable for bag flaps and closures, but not necessarily for wallets. The...

These Wallet Closures are the bars that sit on the top edges of wallets & purses. You put the back on one side and the front (with hole) on the other and pull them together to close your wallet up tight. The flip part clicks in place nicely for security. They are prepackaged and come with 10 screws (8...

Strap Keepers - also known as bridges, bridge connectors, or strap connectors. These are gorgeous, and high quality. With the 1/4" (6mm) height, you should be able to get 1 or 2 layers of strap underneath, depending on how you are using them. Click HERE for the installation Tutorial Inside Measurements:...

Add shoulder straps and purse chains to your wallets and clutches so easily with these quality side clips. These are ready-made strap tabs, perfect for use with our 1/2" Swivel Snap Hooks . These look gorgeous, and are sturdy and so easy to use. Perfect for the Necessary Clutch Wallet ! EACH PACKAGE...

Small turn locks for your purses and wallets. Perfect for the The Necessary Clutch Wallet pattern from Emmaline bags. Easy to install. Available in the following finishes: - antique brass - copper - gold - gunmetal - iridescent - silver Sold in packs of 1. Prices may vary depending on the finish. How...

Finish up your bag straps or add decorative details with these Double-Cap Rivets (both the front and back look like a smooth round cap). Go HERE for an awesome tutorial to teach you about choosing the right size, installing, and which tools you may need. Measurements: Small: 5/16"...

These nice thick metal end caps will finish off your 3/4" wide (18 mm) bag straps beautifully. They are high quality with a professional textured finish on the back side. Just slide these onto the end of your strap and use the 2 include screws to secure. Mini screw driver required & glue highly recommended....

These nice thick metal end caps will finish off your 1 1/2" wide (38 mm) bag straps beautifully. They are high quality with a professional textured finish on the back side. Just slide these onto the end of your strap and use the 2 include screws to secure. Mini screw driver required & glue highly recommended....

These nice thick metal end caps will finish off your 1" wide (25 mm) bag straps beautifully. They are high quality with a professional textured finish on the back side. Just slide these onto the end of your strap and use the two included screws to secure. Mini screw driver required & glue highly recommended....

A shiny single link chain will swing from your arm beautifully and bling up any handmade bag! Comes with large hooks on each end, big enough to clip onto a 1/2" D-ring 44" Long (112 cm) x 1/4" (6 mm) wide (46 1/2" total length including hooks)

A very sturdy, high quality press lock. No key required, this is a non-locking press lock/thumb catch/tongue lock! Go HERE for the installation tutorial. OR Install this little lock by sliding the press part onto a finished bag or wallet flap and screwing through the back to secure - USE GLUE for security!...

Sold in a 4 Pack - These SCREW together grommets come with front and back pieces that screw together with 2 screws that are provided. Recommended for use with leather, vinyl, cork, and heavy woven fabrics. Use Fray Check on fabric edges that fray, use glue for metal & fabric, or rubber cement/contact...

Metal hanging tag for bag straps, with ball chain. Swing one of these shiny little treasures from your bag strap or strap ring, and bling up your handmade bag, tote or other DIY project. These are exclusive Emmaline designs. Measurements: Diameter: 32 mm (1-1/4") Thickness:...

Finish up your bag straps or add decorative details with these Double-Cap Rivets (both the front and back look like a smooth round cap). Go HERE for an awesome tutorial to teach you about choosing the right size, installing, and which tools you may need. Measurements: Medium: 3/8" Caps x 5/16" Post (9mm...

18mm (3/4") SLIM magnetic snap closures for handmade handbags, wallets and purses. Easy to install, no special tools required. Sold in packs of 2 See the installation tutorial here .

14mm (9/16") SLIM magnetic snap closures for handmade handbags, wallets and purses. Easy to install, no special tools required. Sold in packs of 2 Magnetic snaps in antique brass, gold, gunmetal and silver can be found in a separate listing here .

These strap anchors are sleek and stylish! Make a trendy new tote in fabric, vinyl, leather or cork, and use these lovelies to attach your bag straps. You can have them positioned so that the strap ring is above the edge of the bag opening, or below, you choose! They are so easy to attach....

These heavy, high quality, super shiny flip locks are perfect for your purse, satchel, or clutch. They would suit well on a flap or wide strip over your bag opening, giving it a super professional look. The Quarter Note Clutch from Emmaline Bags was specifically designed for this lock. Available in silver...

Finish up your bag straps or add decorative details with these Double-Cap Rivets (both the front and back look like a smooth round cap). Go HERE for an awesome tutorial to teach you about choosing the right size, installing, and which tools you may need. Measurements: Large: 3/8" Caps x 7/16" Post (9...

10 Lobster hooks and 10 Split rings for attaching zipper pulls or charms to your handmade bags. (Zipper pull not included.) These split rings are different than jewellery jump rings, in that they will not pull apart! Super strong and reliable, with a quality lobster hook. Simply split the ring apart...

Turn lock styled in a gorgeous heart shape. These are very pretty and of superb quality and would look fantastic on any wallet, clutch or purse. Easy to install with included screws. Sold in packs of 1. Prices may vary depending on the finish. Measurements: 30mm (1 3/16") x 28mm (1 1/8")

Swing one of these tassel caps from your bag strap ring, and bling up your handmade bag, tote or other DIY project. Use your own cork, leather or vinyl to create a tassel that complements your bag perfectly. How do you make a tassel? Click here for the TUTORIAL Make sure you use an...

These Magnetic Edge Clasps sit on the edge of a bag flap or strap closure. Perfect for gorgeous clutches, handbags, and evening bags. They are very easy to install, and look stunning! Measurements: Width 1 5/8" (40mm) x Height 7/8" (22 mm) To install: Simply attach the magnetic...

Sold in a 4 Pack - These grommets come with front and back pieces and go together very easily with two prongs to fold over the back piece. These are fantastic grommets for purse or tote bag straps or a decorative belt detail. Suitable for thicknesses that compress to 1/8" (3mm) or less. Inside Measurements:...

These extra wide strap sliders , sometimes called "large mouth" or "wide mouth" sliders will work on thick leather, cork or vinyl bag straps! Make adjustable straps on all of your handmade bags! These have a flat profile, with a slightly rounded corner, so we think they will work well with both our FLAT...

These extra wide strap sliders , sometimes called "large mouth" or "wide mouth" sliders will work on thick leather, cork or vinyl bag straps! Make adjustable straps on all of your handmade bags! These have a flat profile, with a slightly rounded corner, so we think they will work well with both our FLAT...

These attach with a very professional looking back plate with screws that lock into threads on the front plate. Very reliable and easy to attach. These are very high quality and won't disappoint. Please note that the name of these has changed from "Edgwena" to "Edge Connectors" to differentiate the old...

A Double Cord Lock is a spring loaded lock that cinches the cords for bags, hoods, & hats, etc. This cord lock is made completely from metal and has a quality finish! Specifications: Width: 5/8" inch or (16 mm) Hole Openings: 3/16 inch (4 mm) Material: Metal Metal Internal...

These strap anchors make bag straps easy! Go for a classy & professional look, or a more casual bag - either will work with these strap anchors. Make a beautiful new handbag in fabric, vinyl, leather, canvas, or cork like the one I made in the photos. The strap ring inside measurement...

14 mm (9/16") Bucket shaped bag feet . Easy to install, no special tools required. Includes 1 washer per foot for added stability. The copper finish is more of a pink/copper than an orange/copper depending on the lighting. It looks a lot like "rose gold", but without it containing actual gold.

18 mm (3/4") Bucket shaped bag feet . Easy to install, no special tools required. Includes 1 washer per foot for added stability. The copper finish is more of a pink/copper than an orange/copper depending on the lighting. It looks a lot like "rose gold", but without it containing actual gold.

These high quality, bag labels are an exclusive Emmaline Bags design. Designed to decorate your bag, purse or wallet and take it to the next level. Who doesn't want a little bag bling? Brag about your "handmade" bag, and show quality and style at the same time. Available in the following finishes: -...

These bag labels are an exclusive Emmaline design. Who doesn't want a little bag bling? Brag about your "handmade" bag, and show quality and style at the same time. Pair with a co-ordinating metal zipper pull , for a complete finished look. Available in the following finishes: - antique brass - copper...

Your handmade bag will look gorgeous with these, while you boast your handcrafted item. An exclusive, Emmaline design. Available in antique brass or silver finishes. Sold in packs of 1. Prices may vary depending on the finish. Measurements: 12 mm (1/2") x 42 mm (1-5/8") How To: Use in the lining or...