Antique Brass

A very sturdy, high quality press lock. No key required, this is a non-locking press lock/thumb catch/tongue lock! Go HERE for the installation tutorial. OR Install this little lock by sliding the press part onto a finished bag or wallet flap and screwing through the back to secure - USE GLUE for security!...

A shiny single link chain will swing from your arm beautifully and bling up any handmade bag! Comes with large hooks on each end, big enough to clip onto a 1/2" D-ring 44" Long (112 cm) x 1/4" (6 mm) wide (46 1/2" total length including hooks)

These nice thick metal end caps will finish off your 1" wide (25 mm) bag straps beautifully. They are high quality with a professional textured finish on the back side. Just slide these onto the end of your strap and use the two included screws to secure. Mini screw driver required & glue highly recommended....

These nice thick metal end caps will finish off your 1 1/2" wide (38 mm) bag straps beautifully. They are high quality with a professional textured finish on the back side. Just slide these onto the end of your strap and use the 2 include screws to secure. Mini screw driver required & glue highly recommended....

These nice thick metal end caps will finish off your 3/4" wide (18 mm) bag straps beautifully. They are high quality with a professional textured finish on the back side. Just slide these onto the end of your strap and use the 2 include screws to secure. Mini screw driver required & glue highly recommended....

Finish up your bag straps or add decorative details with these Double-Cap Rivets (both the front and back look like a smooth round cap). Go HERE for an awesome tutorial to teach you about choosing the right size, installing, and which tools you may need. Measurements: Small: 5/16"...

Small turn locks for your purses and wallets. Perfect for the The Necessary Clutch Wallet pattern from Emmaline bags. Easy to install. Available in the following finishes: - antique brass - copper - gold - gunmetal - iridescent - silver Sold in packs of 1. Prices may vary depending on the finish. How...

Strap Keepers - also known as bridges, bridge connectors, or strap connectors. These are gorgeous, and high quality. With the 1/4" (6mm) height, you should be able to get 1 or 2 layers of strap underneath, depending on how you are using them. Click HERE for the installation Tutorial Inside Measurements:...

These Wallet Closures are the bars that sit on the top edges of wallets & purses. You put the back on one side and the front (with hole) on the other and pull them together to close your wallet up tight. The flip part clicks in place nicely for security. They are prepackaged and come with 10 screws (8...

These heavy, high quality turn locks are of superb quality and will make a statement on any of your handmade bags and purses. Easy to install with included screws. 1- 7 /8" ( 47 mm) wide 3/4" (18 mm) high Important!! These are suitable for bag flaps and closures, but not necessarily for wallets. The...

Metal Zipper pulls are an exclusive Emmaline design. These are thinner and a bit longer than the "handmade" version sold in another listing, and are perfect for zipper pouches, purses, internal pockets, and bag openings. Pair with a co-ordinating metal bag label. These pulls each come...

These zipper pulls are an exclusive Emmaline design. They each come with a strong lobster hook and split ring that will not pull apart or break, already attached. Debossed with "handmade" on both sides, these zipper pulls add an eye-catching statement to your bag openings, exterior pockets, or interior...

Metal Corners for use on bag, clutch, & wallet flaps or even book covers. Suitable for fabric/leather thickness of 3mm. Bling up your bag or wallet with these corners! Click here for a great installation tutorial on Chris W Designs' blog. ...

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight. They also have screw holes in the...

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight. They also have screw holes in the...

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight. They also have screw holes in the...

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight. They also have screw holes in the...

These heavy, high quality turn locks are of superb quality and will make a statement on any of your handmade bags and purses. Easy to install with included screws to attach the front and back plates together onto the front flap, and a metal washer to connect turning (twist) part onto the bag/wallet body....

Metal Zipper Ends - these can be added to the ends of zippers instead of sewing fabric zipper tabs which can be quite fiddly! Can also be used as cord ends. Go to the Installation Tutorial. Instructions: Trim the zipper tails off so they are just beyond...